Orion-system GPC-XP Controller Instrukcja Użytkownika Pobierz pdf (Strona 36)

Section 9: Setting Schedules

GPC-XP Controller Technical Guide

Schedules Window

Setting Schedules

Click the <Schedule> button in the Schedules Status Window

(Figure 73, page 35) to open the Schedule Conﬁ guration Window

(Figure 74 below). You can conﬁ gure up to (8) separate schedules

for various uses on the GPC-XP Controller. These Schedules are

(7) day, (2) event per day Schedules.

Figure 74: Schedule #1 Conﬁ guration #1 Window

The Schedule Conﬁ guration Window in the example shows a 7:30

AM to 5:30 PM operating schedule for Monday through Friday. The

bars on the right side of the screen give a visual indication of the

selected time periods.

When you enter a time in any ﬁ eld, you must designate AM or PM

and

press <ENTER> to save.

NOTE: Yo u M UST press <ENTER> to have the system accept

your entry. If you do not press

<ENTER>, the bar graph to the right

will either not display or will not change.

The holiday start and stop times will override the standard operat-

ing hours. The holidays themselves are scheduled in the

Holiday

Schedule Window described on page 38.

To eliminate a schedule from any event, simply type a zero and press

<ENTER> for the Start and Stop time for that day. The screen will

display 12:00 AM for both the Start and Stop times, indicating that

the equipment will not activate for that day.

If you want the controller to run the full 24 hours, type a zero and

press <ENTER> to set 12:00 AM for the Start time and type 11:59

PM and

press <ENTER> for the Stop time. This ensures the full 24-

hour period will remain in the occupied mode without interruption.

Select <Save> to save your schedule. Select <Restore> to restore

a previously saved schedule.

Select <Copy to All> to copy the

schedule to all like controllers,

select <Set 24 Hour Operation>

to all schedules in this window for continuous operation, and select

<Erase Schedules> to completely erase the schedule appearing

in the window. See page 37 for an explanation of each of these

functions.

WARNING: <Erase Schedules> will clear ALL entered

stop/start times, so use with caution.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Orion-system GPC-XP Controller Instrukcja Użytkownika Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Orion-system GPC-XP Controller