Orion-system SA E-BUS Controller Instrukcja Użytkownika Pobierz pdf (Strona 12)

Zone

Installation & Wiring

SA E-BUS Controller Technical Guide

Digital Room Sensor Wiring

Digital Room Sensor

The OE217-00 Digital Room Sensor is used to sense Space Temperature

and the OE217-01 Digital Room Sensor is used to sense Space Tem-

perature and Space Humidity. The Sensor connects to the SA E-BUS

Controller with the TSDRSC modular cable. It should be mounted at ap-

proximately 5 ft. above the ﬂ oor on the wall in an area that does not have

drafts or is exposed to direct sunlight. See Figure 6 for wiring details.

I2C DIGITAL

SENSOR

I2C

EXPANSION

STATIC

PRESSURE

ANALOG INPUT JUMPER SETTINGS

MUST BE SET AS SHOWN FOR

PROPER OPERATION

24 VAC POWER ONLY

WARNING! POLARITY MUST BE OBSERVED

OR THE CONTROLLER WILL BE DAMAGED

AI2

AI3

AI4

THERM

4-20mA

0-10V

0-5V

AI5

AI7

WattMaster Label

#LB102033-01

AI1

I1 SET

AI2 SET AI3 SET

AI4 SET AI5 SET AI7 SET

AI2

AI3

AI4

AI5

AI7

SA E-BUS Controller

Digital Room Sensor

Display

Override

OVERRIDE ALARM

TSDRSC Cable

Note: The Connects

Directly To The Controller Using

A Of The Appropriate

Length.

Digital Room Sensor

SA E-BUS

TSDRSC Cable

The Maximum Length Allowed Is

160 Feet.

EMERGENCY SHUTDOWN

Note: No Additional Wiring is Required For

Dual Cabinet Units.

Figure 6: OE217-00 & OE217-01 – Digital Room Sensor Wiring

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 73 74

Komentarze do niniejszej Instrukcji

Brak uwag

Orion-system SA E-BUS Controller Instrukcja Użytkownika Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Orion-system SA E-BUS Controller