Orion-system VCC-X Controller Instrukcja Użytkownika Pobierz pdf (Strona 92)

APPENDIX C - RSMV LCD SCREENS

VCC-X Controller Technical Guide

CONFIG

VFD TEST

ADDRESS

1(152)

REFRIG

MODULE

E-BUS

SOFTWARE

1072v101

Hold for 5 seconds.

DIAGNSTC

ENTER TO

EXIT

Protected Screens Map

Refer to the following map when navigating through the LCD

Protected Screens. From the REFRIG MODULE Screen, press

<ENTER> twice to get to the Software Screen. Then hold the <UP>

button for 5 seconds. To scroll through the rest of the screens, press

the <MENU> button.

Alarm History & Protected Screens

Alarm History Screens

The ALARM HISTORY Screen displays past alarms, if any, and how

long ago the last of each type occurred. From the ALARM HISTORY

Screen, press <ENTER> to scroll through the history screens.

ALARM

HISTORY

The Alarm will appear on the ﬁ rst line and the second line will display

how long ago each alarm last occurred. As a result, the alarms listed

on the ALARMS screen will be abbreviated as follows in order of

the way they are listed in the prior ALARMS screen section.

LOW SP—Low Suction Pressure

UNSAFE SP—Unsafe Suction Pressure

SP SENSE—No Suction Pressure Sensor Detected

HIGH HP—High Head Pressure

HP SENSE—No Head Pressure Sensor Detected

CL TEMP 1—Coil Temp 1 Failure

CL TEMP 2—Coil Temp 2 Failure

COMP 1 FL—Compressor 1 Failure

COMP 2 FL—Compressor 2 Failure

LOW SH1—Low Superheat 1

LOW SH2—Low Superheat 2

COMM T/0—E-BUS Slave Timeout

NOTE: The screen will display minutes for the ﬁ rst 60 minutes

of alarm occurrence, hours for the next 72 hours of

alarm occurrence, and days for the next 30 days of

alarm occurrence. After 30 days, the alarm will clear.

Alarm history is not stored in memory. So, if power

is lost, the alarms will clear.

EBUS SLAVE (SLV) TIMEOUT: This alarm indicates that com-

munication has been lost between the RSMV and the Main controller

or other E-BUS modules that may be connected. This can be the result

of a bad cable, a missing cable, or the module not being conﬁ gured

properly.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 119 120

Komentarze do niniejszej Instrukcji

Brak uwag

Orion-system VCC-X Controller Instrukcja Użytkownika Strona 92

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Orion-system VCC-X Controller